Airbus Military NA (previously CASA NA) needed a maintenance repair and overhaul facility in North America to service its customers in the Western Hemisphere. The project included a 29,500-square-foot hangar and office building. The work was completed as a design/build project with Dunn Building Company. This award-winning structure came in on time and under budget. GSE provided all design services for the project, including civil, structural, mechanical, electrical, life safety and fire protection.
GSE partnered with Forrest Daniell & Associates to provide mechanical, plumbing, electrical and structural design for the renovation of Phillips Preparatory School, with a construction budget of $7.6 million. Phillips was initially constructed in 1954. GSE’s scope of work included the design of a new cafeteria, kitchen, gymnasium and classrooms, as well as a complete mechanical upgrade of the air conditioning and central heating units, plumbing, roofs, security doors and technology infrastructure.
GSE provided all structural engineering for renovating the existing 10,000-square-foot Daphne City Hall and the 30,000-square-foot addition. The complex architectural design of the building called for numerous structural systems that included precast concrete, load-bearing masonry, architectural structural steel and exposed timber. Other services included precast and tilt-up, safe room, shallow foundations, steel framing and load-bearing metal studs.
This 10,000-square-foot outpatient oncology center provides care for patients throughout the Mississippi Gulf Coast. GSE provided this facility’s civil site, structural, mechanical, electrical, plumbing and fire protection design. Services site utilities, paving and grading, drainage design, shallow foundations, lighting controls, fire alarm, deep foundations, HVAC systems, panel boards, data/telecom, low voltage, medical gas, transformers and a hazardous exhaust system.
GSE partnered with ANF Architects to provide engineering design for various Chili’s restaurants. New restaurants opened in the following cities: Auburn, Madison, Mobile, Fultondale, Decatur, Gadsden, and Montgomery, AL, and also in Madison, MS. Each restaurant was a 5,500-square-foot new prototype restaurant for Chili’s. GSE’s scope of work included structural, mechanical, electrical, civil site and fire protection design. Services included master planning, shallow foundations, HVAC systems, plumbing, drainage design, fire alarm, data/telecom, low voltage, grading and paving, lighting controls, load-bearing masonry and load-bearing timber.
GSE provided engineering services for multiple Walk-On’s locations in recent years, helping this once-local restaurant grow into a multi-state chain. Civil, Structural, Mechanical, Electrical and Fire Protection design services were provided for the Site Plan Development. Other services included stormwater modeling, site utilities, ventilation systems, shallow foundations, steel framing, HVAC systems, medium voltage, fire alarm, plumbing, lighting control and data/telecom. A specialized HVAC design was also provided for a porch area with roll-up garage doors.
SSAB North America (formerly IPSCO) chose GSE to provide all design services for the new heat treatment and quench line 6 (QL6). The new facility has the capacity to produce 300,000 tons of hardened steel per year. Scope included all utilities, building and equipment foundations, and the 1 million gallon quench system. Additional projects for SSAB include the expansion of quench line 5 (QL5), the addition of a vacuum tank degasser (VTD) to their existing melt shop, and water treatment facility design, along with various maintenance projects throughout the site. GSE has further supported SSAB’s operations and construction with conventional surveying techniques, construction support, aerial mapping/construction tracking capabilities and crane rail alignment surveys.
Constructed on a 30-acre Greenfield site, this facility houses a world-class hybrid automotive blanking line with a width capability of up to 2050 mm. Other enhancements include the ability to inspect, clean, level and lubricate sheet as well as produce rectangular, chevron and custom shapes. GSE provided civil, rail, architectural, life safety, and foundation design for Phase 1 and 2 of this project. Phase 1 was completed as a design-build partnership with Brasfield & Gorrie. The facility comprises over 200,000 square feet of environmentally controlled process and coil storage, an administrative office building, a tornado shelter and pallet storage. Phase 2 includes a new 2133 mm wide slitter.
GSE was contracted by Drever International (SMS Group) to provide engineering design for the steel structures of the furnace, cooling and post-treatment towers that support Nucor/JFE’s new Hot Dip Galvanizing Line. The galvanizing line is expected to produce 400,000 tons of steel strips yearly, specifically deep-drawing grades and high-strength steels for the automotive industry, including modern dual-phase steels.
GSE provided front-end engineering services in support of Braidy Industry’s planned aluminum mill in Ashland, KY. The front-end design scope required extensive coordination with primary vendors SMS, Ebner, Gautschi, Amova and several more in support of the melting and casting furnaces, hot mill, cold mill, annealing furnaces, CASH Lines and two automated coil handling bays. GSE’s scope included general arrangements, life safety, material handling, building and equipment foundations, medium voltage electrical, process, and fire protection design for the 1.6 million-square-foot facility, budgeted at approximately $1.4 billion.
